Quick connect/disconnect, laser-welded flush diaphragm and mating parts are available in accessories.
Quick‑Clamp Hygiene • Laser‑Welded Flush Membrane • Built to DIN 11854 / SMS / RTJ & IDF Standards
The FLUSH SANITARY DIAPHRAGM SEAL from AIMS Control is engineered for ultra‑clean pressure measurement in dairy, brewery, beverage, and biotech applications. A polished clamp connection (DIN 11854, SMS, RTJ/APV, or IDF/ISS) snaps on and off in seconds, while a laser‑welded flush diaphragm ensures a crevice‑free surface that meets stringent CIP/SIP requirements. Filled with food‑grade glycerine (10 °C … 150 °C), this seal transmits pressures from 0 … 1.6 bar up to 0 … 40 bar with fast, linear response.
| Feature | Benefit |
| Quick Clamp / Disconnect | Tool‑free maintenance slashes downtime during product changeovers. |
| Flush Laser‑Welded Diaphragm | No corners or gaps—prevents bacterial growth and meets EHEDG / 3‑A guidelines. |
| 316L Stainless Steel Wetted Parts | Electropolished ≤ 0.4 µm Ra finish for superior cleanability and corrosion resistance. |
| Food‑Grade Glycerine Fill | Stable viscosity from pasteurisation temperatures down to chilled CIP rinse cycles. |
| Direct or Remote Mount | Attach the transmitter right at the clamp or isolate it via SS‑armoured capillary (0.5 m–10 m). |
Each FLUSH SANITARY DIAPHRAGM SEAL is helium‑leak tested (1 × 10⁻⁶ mbar‑L/s) and hydro‑proofed at 150 % of design pressure. Delivered with EN 10204 3.1 material certificates, FDA compliance for fill fluid, and ISO 9001 quality documentation.
Need sterile, flush‑face pressure isolation you can clean in place?
Request a quote for the FLUSH SANITARY DIAPHRAGM SEAL today, or chat with our specialists to choose the right clamp standard, fill fluid, and capillary length for your process.
