One-piece construction, Laser welded diaphragm, Flushed diaphragm, Ideal for Transmitters.
One‑Piece, Flush‑Face Isolation for Viscous, Slurry & Sanitary Media
The THREADED FLUSH DIAPHRAGM SEAL from AIMS Control delivers crevice‑free protection for pressure transmitters, gauges, and switches installed in lines that carry syrups, slurries, crystallising liquids, or hygienic products. A forged‑body design with a laser‑welded, flush diaphragm eliminates dead pockets where media can cake or bacteria can breed, while threaded process connections make installation simple and leak‑tight.
| Advantage | What It Means for You |
| One‑Piece Forged Construction | Zero gaskets = zero leak paths; resists vibration and thermal shock. |
| Laser‑Welded Flush Diaphragm | Uniform weld bead provides long fatigue life and smooth, CIP‑friendly surface. |
| 316L SS Wetted Parts (std.) | Excellent corrosion resistance; exotic alloys available for aggressive media. |
| Wide Range Capability | Handles 0 … 4 bar → 0 … 600 bar with full‑vacuum tolerance. |
| Rapid‑Response Fill Fluid | Pre‑charged with Silicone DC 200 (‑40 °C … +205 °C) for fast, linear pressure transfer. |
| Direct or Remote Mounting | Screw directly into the process or connect via capillary to isolate heat & vibration. |
Every THREADED FLUSH DIAPHRAGM SEAL is helium‑leak tested to 1 × 10⁻⁶ mbar‑L/s, hydro‑proofed at 150 % of design pressure, and certified to ISO 9001 quality standards. EN 10204 3.1 material certificates accompany each shipment for full traceability.
As leading pressure gauge manufactures in Gujrat India, AIMS Control provides:
Need a clog‑free, sanitary isolation solution? Talk to our specialists about the THREADED FLUSH DIAPHRAGM SEAL—and keep your transmitters performing reliably, shift after shift.
